Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Global Modem USB730L - Activate / Set Up Device

2026-10-27 08:51:06.751

Global Modem USB730L - Activate / Set Up Device

Here's how to quickly set up your Global Modem USB730L.
Ensure the following system requirements are met and the computer isn't connected to an alternate Internet connection (e.g. LAN, Wi-Fi):
  • Operating Systems:
    • Windows 7 or higher
    • Mac OS X 10.8 or higher
    • Linux OS
    • Chrome OS
  • Browsers:
    • Microsoft Internet Explorer 9 or higher
    • Mozilla Firefox 3.6 or higher
    • Google Chrome 9 or higher
    • Apple Safari 5 or higher
    • Opera 9 or higher
  1. If a SIM card is preinstalled, skip to step 2.
  2. Connect the USB modem to the computer.
    No additional software is required to connect.
  3. Once the LED Status Indicator starts blinking green, launch a web browser.
    It can take up to 2 minutes to connect. If you get a message that the device is not responding, allow time for the device to complete the connection.
  4. If needed, navigate to:
    http://my.usb
     (IP address 192.168.1.1) and view the Network Status info (located at the top).
    Only the customer with the installed modem and an active connection (as indicated by the status indicators) can access the web portal.