Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Inseego Business Phone Connect - General Device Info

2026-10-27 10:20:02.347

Inseego Business Phone Connect - General Device Info

Here's general device info for your Business Phone Connect.

Don't place a USB-based device into the power connector port of the Business Phone Connect. Doing so may damage the Business Phone Connect and negate its warranty.
Device details
  1. External antenna connectors
     - jacks for two optional antennas in areas of low signal strength.
  2. Power connector port
     - USB port for the AC power adapter.
  3. Ethernet port
     - Ethernet port used for wired Internet connection.
  4. Alarm port
     - dedicated port for a security alarm.
    Do not connect a phone or fax to the yellow port labeled Alarm. This port is intended for connecting a security system only. Inserting a phone line into this port will cause the phone to stop working.
  5. Phone/fax port
     - jack to connect either a phone or fax.

Device details
  1. Battery cover
     - remove to access the batteries and/or reset button.
  2. Batteries
     - three AA batteries in case of power failure.
  3. Reset button
     - resets the device back to factory defaults.
  4. Power/status indicator
     - turns device on and off; light indicates device status. See LED Status Indicators for more info.