Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Add a Wi-Fi Network - motorola edge+

2026-10-27 13:39:46.154

Add a Wi-Fi Network - motorola edge+

Here's how to connect your motorola edge+ to a Wi-Fi network.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up to access all apps.
  2. Navigate:
    Settings Settings icon
    Network and Internet
    Internet
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on.
  4. From the Wi-Fi networks section, tap the preferred network.
    If the preferred network is not listed, it can be added manually.
  5. If prompted, enter the appropriate password then tap
    Connect
    .
    To view the password as it is being entered, tap (check)
    Show password
     (enabled when a checkmark is present).
    If necessary, tap
    Advanced options
     to ensure any additional settings (e.g., Proxy settings, IP settings, etc.) are configured appropriately.

Manually Connect to a Wi-Fi Network

Wi-Fi network info is required to complete several steps. Refer to your internet service provider or the network admin for assistance.
  1. From a Home screen, swipe up to access all apps.
  2. Navigate:
    Settings Settings icon
    Network and Internet
    Internet
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on.
  4. Tap
    Add network
     Add icon .
  5. From the Network name SSID field, enter the appropriate network name.
  6. From the Security field, tap the
    Dropdown menu icon
    .
  7. Tap the applicable security option:
    If using an Open network (None), skip to step 10.
    • None
    • Enhanced Open
    • WEP
    • WPA/WPA2-Personal
    • WPA3-Personal
    • WPA/WPA2-Enterprise
    • WPA3-Enterprise
    • WPA3-Enterprise 192-bit
  8. If prompted, enter a User name in the Identity field.
  9. Enter the password into the Password field.
    To view the password as it is being entered, tap
    Show password
     (enabled when a checkmark is present).
  10. Tap
    Advanced options
     then ensure all additional settings (e.g., Proxy, IP Settings, etc.) are configured appropriately (if applicable) then tap
    Save
    .