Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Set Up Fingerprint Recognition - motorola edge+

2026-10-27 12:22:47.899

Set Up Fingerprint Recognition - motorola edge+

Here's how to set up fingerprint recognition on your motorola edge+.
  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to 5 fingerprints can be registered on the device.
  1. From a Home screen, swipe up to access all apps.
  2. Navigate:
    Settings Settings icon
    Security
    .
  3. From the 'Device security' section, tap
    Fingerprint
    .
    If presented, enter the current PIN, password or pattern.
  4. Tap
    Set up
    .
    If applicable, review the 'Using a screen protector' prompt then tap
    Got it
    .
  5. Tap and hold the onscreen
    Fingerprint sensor
    .
  6. Place your finger on the sensor until it vibrates then lift.
    Repeat this step as necessary until the process is complete.
    For greater accuracy, finger placement should vary slightly each time.
  7. Tap 'Done' or 'Add another'.