Session status messages
Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

CTL Chromebook NL71CT-L - Add a Wi-Fi Network

2026-10-27 10:20:08.894

CTL Chromebook NL71CT-L - Add a Wi-Fi Network

Here's how to connect your CTL Chromebook NL71CT-L to a Wi-Fi network.
If you need to add an available Wi-Fi network to your CTL® Chromebook NL71CT-L, follow these step-by-step instructions.

Connect to an Available Wi-Fi Network

  1. From a Home screen, navigate:
    Launcher
    Settings
    .
  2. Tap or click
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch is turned on Switch on then select the preferred Wi-Fi network.
    If the preferred network isn't listed, it can be added manually.
  4. If presented, enter the appropriate password then tap or click
    Connect
    .
    To view the password as it is being entered, tap or click
    Show password
    Show password icon .

Manually Connect to a Wi-Fi Network

Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
  1. From a Home screen, navigate:
    Launcher
    Settings
    .
  2. Tap or click
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch is turned on Switch on then select the preferred Wi-Fi network.
  4. Tap or click
    Add Wi-Fi
    (next to on switch).
  5. From the SSID field, enter the appropriate name.
  6. From the Security field, tap or click the
    Dropdown menu
    (on the right).
  7. Select one of the following security options:
    If using an Open network (None), skip to step 9.
    • None
    • WEP
    • PSK (WPA or RSN)
    • EAP
  8. From the Password field, enter the appropriate password.
    To view the password as it is being entered, tap or click (check)
    Show password
    Show password icon .
  9. Ensure additional settings (e.g., EAP method, Phase 2 authentication, CA certificate, etc.) are configured appropriately (if applicable) then tap or click
    Save
    .