Session status messages
Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

One Talk T41S/SW, T42S, T42U IP Desk Phones - Restart Device

2026-10-27 11:04:42.637

One Talk T41S/SW, T42S, T42U IP Desk Phones - Restart Device

Here's how to restart your One Talk T41S/SW, T42S or T42U IP desk phone.
  • To make a selection, press the appropriate corresponding soft key.
  • For T41 desk phone models, you can perform a soft reset by holding the
    X button
    (directly below the 4-way navigation pad) for 5 seconds then pressing
    OK
    at the reboot phone screen prompt.
  1. From the Home screen, press the
    Menu soft key
    .
  2. Using the navigation arrow keys, select
    Settings
    then press
    OK
    .
  3. Select
    Advanced
    then press
    OK
    .
    Settings menu
  4. Enter the password then press the
    OK soft key
    .
    The default password is "admin".
    Use the keypad to enter characters. For example, "admin" is entered as 2 3 6 444 66.
    Enter password
  5. Select
    Reboot
    .
    Select Reboot
  6. Press
    OK
    to reboot the phone.
    Press OK
  7. The Desk phone begins the initialization process.
    The process may take up to 15 minutes.
    The phone displays "Initializing, please wait during this process."
  8. After successful activation, the 911 notification screen displays. Press
    OK
    .
    To view your 911 address, press the
    Address key
    to the right of the LCD screen.
    911 address screen